You place  All products >> Bar code Reader series  >> Handheld Scanner
Products Nane AS-8110 Handheld Barcode Scanner
Models AS-8110
Sort Bar code Reader Handheld Scanner
Welcome speak for ! [ONLINE ORDER]

   AS-8110 Handheld Barcode Scanner

The Argox 8110 scanners offers excellent scanning performance at an attractive, entry-level price. The Argox AS-8110 reads from contact to 50mm from the barcode and provides accurate decoding in seconds. This scanners features ultra-low power consumption and an all-in-one universal host interface. A Windows utility is included.

Argox AS-8110 Handheld Barcode Scanner Specifications

Operational
Light source 660 nm visible red LED
Optical system 2048 pixel CCD (charge-coupled device)
Depth of scan field 0-50 mm
Scanning width 80 mm
Scan speed 50 scans/sec
Resolution 0.125mm(5mils) - Code 39,
PCS=45 %, on contact
Print contrast 30% or more
Scanning angle Front: 60 Rear: 60 Yaw: 75
Decode capability Autodiscriminates all standard barcodes; other symbologies can be ordered optionally
Beeper operation 7 tones or no beep
Indicator Green led
Mechanical
Length 182 mm
Width-handle 26 mm
Width-head 90 mm
Depth-handle 51 mm
Depth-head 35 mm
Weigh 150 g (cable not included)
Cable - K/B wedge Straight 2.0 m
Cable - universal type Straight 2.3 m
Connector type RJ-45 phone jack connector
Case material ABS plastic
Cushion material Rubber
Environmental
Operating temperature 0 to 40 (32 to 104)
Storage -40 to 60 (-40 to 140)
Humidity 5% to 90% relative humidity, non-condensing
Light level Up to 15000 Lux
Shock 1.5m drop onto concrete
Contaminants Seals to resist airborne particulate contaminants
Electrical
Input voltage 5 VDC 0.25V
Power - operating 900 mW
Power - standby 500 mW
Current - operating 55 mA @ 5 VDC
Current - standby 44 mA @ 5 VDC
Current - sleep mode 15 mA @ 5VDC
DC transformers Class 2; 5VDC @ 450 mA
EMC FCC Class A
Programming
Programming method Manual (reading special barcode), DOS command through RS-232, Windows configuration program
Program upgrade Enabled by build-in flash memory
Programmable characteristics Code type selection, check digit selection, Decoding options: Transmitted character delay, Header selection, trailer selection, message suffix, good read beep tone and volume. Scanner trigger selection. Keyboard emulation type (intermessage delay, keyboard type and keyboard language). Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits).